How To Revive A Dead Car Battery With Epsom Salt

by Phil Borges // in Car

Has your car battery been acting up lately? Is your car battery dead? If ever you encounter these questions, you may be wondering what to do next.

There are a few things that you can try before spending money on a new battery. One of these solutions is Epsom Salt.

This article will discuss how Epsom salt restores the power in a car battery and why it is essential for drivers to know about this solution.

By following the instructions below, you’ll have your car running again in no time.

Epsom Salt and Uses

Epsom salt is a naturally occurring mineral compound made of magnesium and sulfate. The salts are known for their detoxifying properties, which can help restore the power in your battery.

Epsom salt battery restoration or when you use Epsom salt in car battery, it will serve as a booster agent to your dead or dying battery. It’s possible to remove the sulfate crystals that have been built up around your battery. Once removed, it is easier for the current to flow back through and power your engine again.

It’s important not to mix Epsom salt with other liquids in order not to dilute its effects.

How To Repair Car Battery With Epsom Salts

For safety procedures, we recommend that you do make sure the area is well ventilated, materials are prepared, and your safety glasses are on before performing the Epsom salt battery solution.

For this process, we will need a distilled water, baking soda, and Epsom salt.

Step one:  To keep your battery healthy, you must first flush out all of the old chemicals that are in it.

If you have medium size 16 cell plates battery, pour one liter of distilled water and mix in two tablespoons of baking soda until fully dissolved. Pour into the battery with care to avoid any harm using recommended keeve because it is harmful when coming in contact with eyes or skin.

You want to avoid any harm from pouring too much fluid at once or shocking yourself during cleaning because electricity is not suitable for people, so you must be careful.

The most effective way to clean your battery is by waiting 5-10 minutes before you flush it. Flushing the chemical in this time period will allow for maximum cleaning of all cell plates, which could be why your battery is failing.

Step two: Next is to fill it with the mixture of Epsom salt and a distilled water.

Mix 1 liter of distilled water with two tablespoons of Epsom salt and wait until fully dissolved.

To avoid any harm, we recommend using a funnel to fill the battery with this mixture.

After doing this method, its survival will depend on your current battery’s condition, but it’s safe to say you’ll get an average life span out of about 2-3 months.

Some Essential Reminders to Follow for Epsom Salt Battery Restoration:

  • It is vital to wear goggles and glasses before performing the Epsom solution with your car battery. Don’t forget; it could be dangerous as your eyes will be exposed to fumes, leading to irritation.
  • Do not mix Epsom salt with any other liquids or chemicals, as it will dilute the effects.
  • When you’re in an emergency, a simple yet effective way to resurrect your batteries is by repeating the process. It can be done 2-4 times before they are completely recovered and ready for use again.
  • Avoid performing this method when the battery is hot, as it may result in malfunction. Wait until the battery cools down before applying the solution.

Frequently Asked Questions

Are there setbacks in using the Epsom solution?

The only setback in using Epsom salt solution to revive your battery is that it can be a complicated process to some, depending on the size of your car.

For small 12-volt batteries, the process is much simpler. For a 24-volt battery, it may take more time and effort to refill your car with this solution.

However, this solution does work and has been proven to be a reliable solution for battery restoration.

Can I use tap water instead of a distilled water with Epsom solution?

No. Tap water is not a safe solution to use with batteries because of the minerals and chemicals present in it, leading to possible corrosion that might build up inside the battery.

Make sure to use a distilled water or purified water with Epsom salt for a better result.

What should I do if my battery has been out for too long?

There may be some cases where your car’s battery will have been dead for an extended period, causing you much frustration when trying to start it up. This is why it is always essential to keep your battery well charged to prevent this from happening. In some severe cases, you may consult a specialist or local mechanic to help fix this problem.

What should I do if Epsom solution didn’t work?

If you found out that your battery still won’t work after performing the Epsom salt solution, then chances are it is time to get a new battery for your car. The battery is most likely damaged and unrepairable in this scenario.

Is Epsom salt solution safe to use?

Epsom salt solution is a safe and effective way to bring your car battery back to life in an emergency.

Can I use regular salt instead of Epsom salt?

No. Epsom salt is the most efficient choice for battery restoration because of its natural mineral and electrolyte characteristics.

What are some other ways I can fix my car?

You might want to consider having your alternator checked out, which may be faulty or not working correctly. There may also be an issue with your battery’s cables and terminals, which would most likely be the cause of your car not working. Damaged car battery terminals can be fixed by sanding the terminal’s corroded surface, then coating it with heavy-duty grease.

In conclusion, this article has provided you an insight to understand better the importance of restoring a car battery using Epsom salt. This is important because it can give you a way to get your car battery back on the road in an emergency. So, make sure to keep Epsom salt nearby for those moments when your car needs some help.

About the author, Phil Borges

Phil Borges is a battery aficionado. He's written extensively about batteries, and he loves nothing more than discussing the latest innovations in the industry. He has a deep understanding of how batteries work, and he's always on the lookout for new ways to improve their performance.