What Should A Chevy Cruze Battery Voltage Be

Maintaining your battery voltage is important because it helps keep your battery performing at its best. When your battery’s voltage drops too low, it means that the battery isn’t holding a charge well. This can be caused by a number of things, such as:

  • Bad alternator: The alternator is responsible for keeping your battery charged. If the alternator isn’t working properly, it can’t keep up with the demand of your electrical system, which will cause your voltage to drop.
  • Bad wiring: Bad wiring can also create a drain on your battery, leading to decreased voltage.
  • Heavy usage: If you’re using a lot of electricity (running the A/C, using the lights, etc.), it can put a strain on your battery and cause the voltage to drop.
  • Low electrolyte level: If your battery’s electrolyte level is low, that can also lead to decreased voltage.
  • The charging system is not working properly: If your car‘s charging system isn’t working properly, it can cause the voltage to drop.
  • Corrosion on the battery terminal: Corrosion on the battery terminal can cause a loss of voltage as the build-up of corrosion can prevent your battery from charging properly.
  • Weak battery: A weak battery is one of the most common causes of a drop in voltage. If your battery is more than three years old, it’s probably time for a replacement.
  • Driving in cold weather: Cold weather can also lead to a drop in voltage as the cold temperature makes it harder for your battery to hold a charge.

If you notice that your battery voltage is dropping while driving, it’s important to have it checked out by a mechanic as soon as possible. Left unchecked, it could lead to a dead battery – and no one wants that.

What are the things you can do to help maintain your battery’s voltage?

There are a few things you can do to help maintain your battery’s voltage:

  1. Keep your battery clean. A dirty battery will have a harder time holding a charge.
  2. Make sure the terminals are clean and secure. Corrosion on the terminals can reduce the amount of voltage your battery produces.
  3. Avoid leaving your battery discharged for an extended period of time. Batteries that are constantly discharged will lose their ability to hold a charge over time.

One way to help maintain your battery voltage is by using a multimeter. This will allow you to monitor your battery’s voltage and make sure that it stays within the proper range.

What should the battery voltage be in a 2015 Chevy Cruze?

The battery voltage for Chevy Cruze should be around 12 volts. A lower or higher voltage could mean that there is a problem with the battery or the charging system. If your Chevy Cruze isn’t running properly, one thing you can do to troubleshoot is testing the battery voltage. As mentioned earlier, you can test the battery voltage with a multimeter.

Testing the voltage of a battery with a multimeter is a pretty straightforward process. First, disconnect the battery from any devices that it’s powering. Once it’s disconnected, attach the black lead of the multimeter to the negative terminal of the battery and then attach the red lead to the positive terminal. The meter should now be reading the voltage of the battery.

If you’re not sure whether or not a battery is still good, you can test its voltage and see how it compares to what’s listed on the battery’s packaging. A fresh battery should have a voltage of around 12 volts, but that number will decrease as the battery begins to lose its charge. Generally speaking, if a battery reads below 10 volts, it’s time to replace it.

Of course, if you’re still having trouble with your Chevy Cruze, it’s always best to consult with a professional mechanic. They’ll be able to help you diagnose any issues and get your car running smoothly again in no time.

Is 11.8 volts a bad battery?

A battery with a voltage of 11.8 volts is definitely not in good shape, and it’s likely on its way to being a dead battery. A battery in this condition may not be able to start your car, or it may only start the car for a very short amount of time. If you’re lucky, your car will start up, and you can get to a service station before the battery completely dies.

In most cases, when a battery reaches a voltage of 11.8 volts, it means that the battery is badly sulfated. This means that there’s too much sulfur on the lead plates inside the battery, and it’s preventing the chemical reaction from taking place that produces electricity. Sulfation is the number one cause of battery death.

If your battery is showing a voltage of 11.80, it’s time to take action. You can try charging the battery with a standard charger, or you can use a desulfation charger. A desulfation charger is specifically designed to remove sulfation from the batteries, and it may help to extend the life of your battery.

If you don’t take action and your battery continues to drop in voltage, it will eventually die, and you’ll need to replace it. A new battery typically costs around $100, so it’s definitely worth taking the time to try and save your old battery.

What should the battery voltage be on a 2018 Chevy Cruze?

A healthy battery voltage for a 2018 Chevy Cruze is between 12.58 and 12.68 volts, with the ideal being 12.65 volts. If your battery falls below this range, it may need to be replaced or recharged. Of course, it’s always best to check with your dealership or with an automotive specialist to keep your car running smoothly.


Chevy Cruze battery voltage is important for the health of your car. If you are experiencing any issues with your Chevy Cruze, it is best to bring it in and have a technician take a look at the battery. We hope that this blog post has been informative and helpful. Thank you for reading!

Back to top

About the author, Phil Borges

Phil Borges is a battery aficionado. He's written extensively about batteries, and he loves nothing more than discussing the latest innovations in the industry. He has a deep understanding of how batteries work, and he's always on the lookout for new ways to improve their performance.