The Ultimate Guide to FRS Battery: Everything You Need to Know

by Phil Borges // in Car

If you own a Scion FRS, you know how important it is to have a reliable battery. The battery is the heart of your car’s electrical system, and it’s crucial to keep it in good condition. In this article, we will discuss everything you need to know about FRS battery, including the kind of battery your Scion FRS takes, how to remove the battery, when to replace the battery, and how to change the battery in your FRS key.

What kind of battery does a Scion FRS take?

The Scion FRS takes a Group 25 battery, which is a standard car battery size. The recommended battery for the Scion FRS is a 12-volt AGM battery with a minimum of 550 cold cranking amps (CCA). It’s important to choose a high-quality battery that meets these specifications to ensure that your car starts reliably.

How do I remove the battery from my FRS?

Removing the battery from your FRS is a straightforward process. Here are the steps to follow:

  1. Turn off your car‘s engine and remove the key from the ignition.
  2. Open the hood of your car and locate the battery. The battery is located on the driver’s side of the engine compartment.
  3. Remove the negative (black) battery cable first. Use a 10mm wrench to loosen the nut on the cable clamp, then wiggle the cable free from the battery terminal.
  4. Remove the positive (red) battery cable next. Use a 10mm wrench to loosen the nut on the cable clamp, then wiggle the cable free from the battery terminal.
  5. Remove the battery hold-down clamp. Use a 10mm socket or wrench to remove the bolts that secure the battery hold-down clamp to the battery tray.
  6. Lift the battery out of the engine compartment, being careful not to tip it over or spill any acid.

When should I replace my FRS battery?

The lifespan of a car battery can vary depending on many factors, including the climate, driving habits, and usage patterns. In general, you should replace your FRS battery every 3-5 years, or as soon as you notice any signs of a failing battery. Signs that your battery may be failing include:

  • Slow engine cranking: If your engine cranks slowly or takes longer to start than usual, it could be a sign that your battery is weak or dying.
  • Check engine light: A failing battery can cause your car’s computer to trigger the check engine light.
  • Corrosion: Corrosion around the battery terminals can indicate that your battery is leaking acid and needs to be replaced.
  • Swollen battery case: If your battery case is swollen or bloated, it’s a sign that it’s overheating and needs to be replaced.

How do I change the battery in my FRS key?

If the battery in your FRS key is dead, you will need to replace it. Here are the steps to follow:

  1. Use a small screwdriver to pry open the key fob. Be careful not to damage the plastic casing.
  2. Remove the old battery from the key fob. The battery is a CR2032 3V lithium coin cell battery.
  3. Insert the new battery into the key fob, making sure that the positive side is facing up.
  4. Close the key fob by pressing the two halves together until they snap into place.

In conclusion, taking care of your FRS battery is crucial to ensure reliable performance from your car. By following the tips and guidelines discussed in this article, you can keep your battery in good condition and avoid any problems down the road.

About the author, Phil Borges

Phil Borges is a battery aficionado. He's written extensively about batteries, and he loves nothing more than discussing the latest innovations in the industry. He has a deep understanding of how batteries work, and he's always on the lookout for new ways to improve their performance.