2011 Jeep Grand Cherokee Key Fob Battery: Everything You Need to Know

by Phil Borges // in Car

If you own a 2011 Jeep Grand Cherokee, you are probably familiar with the convenience of the key fob. With just the push of a button, you can lock and unlock your car, start the engine, and even open the liftgate. But what happens when your key fob battery dies? Don’t worry, it’s a simple fix. In this article, we will cover everything you need to know about the 2011 Jeep Grand Cherokee key fob battery.

What battery does a 2011 Jeep Grand Cherokee key fob take?

The 2011 Jeep Grand Cherokee key fob takes a CR2032 3-volt lithium-ion battery. This battery is widely available and can be found at most electronics or hardware stores. It is important to note that not all key fob batteries are the same, so make sure to use the correct one for your Jeep Grand Cherokee.

What brand of battery does Jeep Cherokee use?

Jeep does not specify a specific brand of battery for the 2011 Jeep Grand Cherokee key fob. As long as the battery is a CR2032 3-volt lithium-ion battery, any brand should work just fine. However, it is recommended to stick with well-known brands to ensure quality and reliability.

How do you change the battery in a 2011 Jeep Grand Cherokee key fob?

Changing the battery in a 2011 Jeep Grand Cherokee key fob is a quick and easy process. Here are the steps:

  1. Locate the small button on the back of the key fob and press it.
  2. While holding down the button, slide the back cover of the key fob off.
  3. Remove the old battery from the compartment and replace it with the new one, making sure the positive (+) side is facing up.
  4. Slide the back cover of the key fob back into place until it clicks.

That’s it! Your key fob should now be working like new.

How do you start a 2011 Jeep Grand Cherokee with a dead key fob?

If your key fob battery is dead, you can still start your 2011 Jeep Grand Cherokee using the keyless enter-n-go system. Here’s how:

  1. Remove the emergency key from the key fob.
  2. Look for a small indentation on the driver’s side door handle and insert the emergency key into it.
  3. Turn the key to unlock the door.
  4. Once inside the vehicle, press the brake pedal and push the “Start/Stop” button to start the engine.

It’s important to note that this will only work if you have the keyless enter-n-go system. If your Jeep Grand Cherokee does not have this feature, you will need to call for roadside assistance or tow your vehicle to a dealership for service.

Conclusion

In conclusion, the 2011 Jeep Grand Cherokee key fob battery is easy to replace and should be done as soon as you notice decreased performance. Remember to use the correct battery, any brand should work, and follow the steps outlined above to change the battery. If your key fob battery is dead, you can still start your Jeep Grand Cherokee using the emergency key and the keyless enter-n-go system.

About the author, Phil Borges

Phil Borges is a battery aficionado. He's written extensively about batteries, and he loves nothing more than discussing the latest innovations in the industry. He has a deep understanding of how batteries work, and he's always on the lookout for new ways to improve their performance.