Batteries manufactured by Makita make it possible for strong tools like chainsaws, blowers, and drills to function properly. Even though these batteries have a stellar reputation for quality and longevity, they still need to be cared for and maintained to achieve their full potential. It can be done by restarting the charging cycle of the battery. If you are having issues with your Makita battery, continue reading for some helpful tips and step-by-step instructions on how to reset your Makita battery chip, so it would function as if it were brand new.
The three ways to perform Makita battery chip reset are to click the reset button on your battery charger, the reset button on the battery pack, and the reset switch on your battery tester.
Here is a generic guide on how to reset most Makita battery chips:
1. Find the reset button on your battery charger.
2. Unplug the battery charger from the wall, hold the reset button down for five seconds, and release it.
3. Plugin the battery charger and wait until the charging light turns green.
Table of Contents
How do I bring my Makita batteries back to life?
One way is to use a battery charger. A battery charger will charge your battery and help to restore its power. You can either buy a specific Makita battery charger or use a universal battery charger. If you’re using a universal battery charger, make sure it’s compatible with lithium-ion batteries.
Once you have a battery charger, you must find the correct model number. You can usually find it on the back of the battery or in the manual. If you don’t know what it is, look at other similar batteries made by Makita and try one until it works for your particular model.
After getting the model number, put the battery in the charger and plug it in. Ensure the charger is turned on, then wait until the light turns green. Once it does, your battery is fully charged.
You can also use a battery tester. It will help you test the voltage of your batteries and see if they need replacement or not.
Why does my Makita battery flash red and green?
The following are the reasons why Makita battery flashes red and green:
A. The charger is not working properly and is not charging the battery. If this is the case, you will need to replace the charger.
B. There may be something wrong with the battery itself, and it needs to be replaced.
C. The tool could be a problem, requiring repairs or replacement.
To check if your charger is working properly, try charging another battery. Otherwise, replace the charger. If you think the battery is bad, try another tool. If it didn’t work with that tool, the battery is likely damaged and needs replacing, as there is no way to fix a damaged battery. You may buy a replacement battery online or at a hardware store.
Why does my Makita battery not charging?
Makita batteries may not charge for numerous reasons. One possibility is that the battery is defective and needs replacement. Another reason could be that there is a problem with the charger itself. If your Makita battery flashes red and green, there’s a problem with the battery and charger. It would be best if you cleaned the battery and charger terminals. If your Makita battery is not charging, the battery or charger may be broken. Try another battery or charger to see which is causing the problem.
Do fake Makita batteries work?
A fake Makita battery may work, but this isn’t always the case. If it does, it will result in poor service.
Below are a few things to consider when determining whether a battery is fake.
Price. If you’re looking at a battery that’s significantly cheaper than a genuine product, it’s likely a fake.
Quality. If it feels cheap or made out of plastic instead of metal, then you can bet it isn’t genuine Makita. The original batteries are built tough and will last for years with proper care.
Performance. Using a fake battery allows a slow or poor performance and would last easily.
Here are a few things you can do to extend the life of your batteries.
- First, make sure you are using high-quality batteries. Cheap batteries often don’t have the power to fully charge or discharge, which can shorten the life of your battery.
- Second, only use your batteries when they are fully charged. If you partially charge them and use them later, you will wear them down more quickly.
- Third, store your batteries in a cool place when not in use. Heat can shorten their lifespan as well.
Indeed, resetting a Makita battery chip is an easy task to do. But, it may still vary depending on the model. So, always review the owner’s handbook for precise instructions. If you are uncomfortable with the procedure, it is highly recommended that you have a professional replace the battery. Furthermore, obtaining an authentic Makita battery is essential for the best and optimal performance. If you are dubious about its legitimacy, there are many ways to evaluate a battery’s authenticity before purchasing it. Still, to be sure, it’s advisable to buy batteries from a reputable seller.