The Autel X Star Battery: A Comprehensive Guide

Autel Robotics produces some of the best drones in the market, and the Autel X Star is no exception. This drone is known for its top-notch performance, high-quality camera, and long battery life. However, as with any battery-powered device, the battery life of the Autel X Star is limited. In this article, we will discuss everything you need to know about the Autel X Star battery, including how long it lasts, how to charge it, and how to reset it.

How long does Autel battery charge?

The Autel X Star drone comes with a 4900mAh Li-ion battery that provides up to 25 minutes of flight time. However, the charging time of the battery can vary depending on the charging method and the power source used. When using the Autel charger, it takes approximately 1 hour and 40 minutes to fully charge the battery. However, it is recommended to use a charging hub to charge multiple batteries at once to save time.

How do I charge my Autel drone battery?

To charge the Autel X Star battery, follow these simple steps:

  1. Make sure the battery is cool to the touch.
  2. Connect the battery to the charger using the provided cable.
  3. Plug the charger into a power source.
  4. The LED lights on the charger will indicate the charging status. When all four lights turn green, the battery is fully charged.

It is important to note that you should never leave the battery charging unattended and always use the provided charger to avoid damaging the battery.

How do I update my Autel X Star premium?

Updating the firmware on your Autel X Star is important to keep your drone running smoothly and to access new features. Here are the steps to update your Autel X Star premium:

  1. Download the latest firmware from the Autel Robotics website.
  2. Connect the drone to your computer using the provided USB cable.
  3. Turn on the remote controller and the drone.
  4. Open the Autel Explorer app and go to the “Settings” menu.
  5. Click on “Update Firmware” and select the firmware file you downloaded earlier.
  6. Follow the on-screen instructions to complete the update.

How do you reset the battery on the Autel Evo?

If you are experiencing problems with your Autel Evo battery, you may need to reset it. Here’s how:

  1. Turn off the drone and the remote controller.
  2. Remove the battery from the drone.
  3. Press and hold the power button on the battery for 10 seconds.
  4. Release the button and reconnect the battery to the drone.
  5. Turn on the drone and the remote controller and check if the issue has been resolved.

In conclusion, the Autel X Star battery is an essential component of the drone, and it is important to know how to charge it, update it, and reset it. Following these guidelines will help you get the most out of your Autel X Star drone and ensure that you have a seamless flying experience.

About the author, Phil Borges

Phil Borges is a battery aficionado. He's written extensively about batteries, and he loves nothing more than discussing the latest innovations in the industry. He has a deep understanding of how batteries work, and he's always on the lookout for new ways to improve their performance.